FC-LC UPC Fiber Optic Patch Cord
PRODUCT DESCRIPTION
Avalon FC-LC UPC fiber optic patchcord is available in both simplex and duplex versions and is fully inter-mateable with NTT-FC products. Both single-mode and multimode versions FC fiber patch come with a Zirconia ceramic ferrule with pre-polished UPC profile and convex spherical end. These end face types allow for faster polishing and low back reflection and optical loss while ensuring maximum repeatability.
Features
· Compliant with TELCORDIA GR-326-Core
· Compliant with JIS C-5973, IEC, TIA/EIA 568-B.3
· Optical performance 100% factory tested with Minimum loss
Applications
· Telecommunication Networks
· LAN
· CATV Networks
· Active Device Termination
· Data System Networks
Specification
Characteristics |
Conditions |
Value |
Insertion Loss Return Loss |
Against Reference Connector |
< 0.2 dB |
SPC |
> 40 dB |
|
UPC |
> 50 dB |
|
APC |
> 60 dB |
|
Durability |
1000 Matings |
< 0.2 dB |
Temperature Cycling |
—40 — +80 degrees Celsius (42 Cycles) |
< 0.2 dB |
Humidity Cycling |
75 degrees Celsius, 95%/336hr |
< 0.2 dB |
Vibration |
10 — 55 HZ ( 2 hours) |
< 0.2 dB |
Flex Test |
0 to 90 degrees to 0 to 90, 5kgf (100 cycles) |
< 0.2 dB |
Twist Test |
0.9mm :0.75kgf, 2.0mm:1.53 kg |
< 0.2 dB |
Straight Pull Test |
100 N Load |
< 0.2 dB |
Impact |
1,5m drop, 8 times |
< 0.2 dB |
Ordering information
Part Number* |
Description |
AN-PCO9FCLCS00X-YY |
FC-LC Singlemode Fiber Patch Cord |
* Replace “X” with 1, 2, 3..10…..30 meters.
* Replace “YY” with SP for Simplex or DP for Duplex
Write a review
Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: